Manufacturers
 
Subscribe to newsletters
Email:
 

Tormek TT-50 Diamond Truing Device with Screw Feed


Genuine diamonds mounted in holder
Manufacturer: Tormek
Product image Product image Product image
Product image Product image
Bookmark and Share

Key Features

  • Genuine diamonds mounted in holder
  • Used to dress or open grindstones when the stone becomes grooved or glazed
  • Easy to set up

Description

A cluster of genuine diamonds is mounted in a holder and used to dress or open the grindstone when the stone becomes grooved or glazed. It takes only a few seconds to set up and can really improve the performance of the wheel. Dual knob screw permits an easily controlled feed across the stone for a perfect flat surface. If you feed faster, you can create a rougher surface which grinds more quickly. Mounts and locks instantly in the right position on the Universal Support of the TORMEK Sharpening System. The cutting depth is controlled by the Micro Adjust on the Universal Support. If you have an older machine without Micro Adjust it can be retrofitted by ordering the US-105.

1. Easy feeding across the stone
You can conveniently and without pressing with your thumbs feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both your hands. The feed can be made in both directions.

Thanks to the controlled feed, you get an even and flat stone surface with no ridges. There is no need to flatten afterwards with the Stone Grader SP‑650. The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves.

2. Controlled cutting depth
The cutting depth is set exactly by the Micro Adjust on the Universal Support. New Universal Supports will have a scale with increments for each 0,25 mm or 0,01". You can also use your existing Micro Adjust, which has no scale. A cutting depth of 0,25 mm or 0,01" corresponds to a sixth of a full turn.

3. Increased steel removal
With a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. This is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels and electric jointer/planer blades.

PLEASE NOTE THIS ITEM IS JIG ONLY YOU DONT GET THE TORMEK SHARPENING MACHINE AS IN PICTURE



Current rating is 0.00. Total votes 0.
 
TT-50
Old price:  £69.96
£67.00
Picture of Tormek Replacement Diamond Tip for TT-50 Truing Device
Tormek Replacement Diamond Tip for TT-50 Truing Device
 

Key Features

  • Replacement diamond tip
  • For Tormek TT-50 truing device
 

 

Old price:  £33.96
£31.96
Product reviews