Sort by
|
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi.
|
|
The saw's spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut.
|
The Veritas dovetail guide, which clamp in position, hold the saw at the correct place and angle for a perfect cut.
|
Specifically designed for the Veritas Dovetail Guides
|
For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting.
|
Traditionally used for the rapid trimming of plugs and dowels flush with a surface, these flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face.
|
Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
|
Package Deal
Veritas Dovetail Saw
Veritas Small Crosscut Saw
Veritas Fine-Tooth Dovetail Saw
|
Serving the dual purposes of topping off the teeth of a hand saw prior to re-sharpening, and providing an accurate guide for filing the edges of cabinet scrapers.
|
Magnets keep the saw aligned
|