Sort by
Half the battle when sharpening is getting the bevel angle correct. A good bevel gauge is truly handy for quickly checking the grind angle of chisels, plane blades, turning tools, etc.
|
This is an attachment specifically designed for use with the Veritas Mk.II Honing Guide.
|
Ideal for honing hardened steel blades, use on your chosen honing block/strop, felt, leather or wood.
|
A commercial sharpening service or a sophisticated home grinder is necessary for badly nicked blades.
|
Measuring 300(12") x 104(4.1/8") x 28mm(1.1/8") high and weighing approximately 6.3kg(14lb), this is one substantial lapping plate!
|
This honing guide overcomes the problem of accurately sharpening narrow blades.
|
The main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step
|
The main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step
|
This well designed guide helps you accurately control the angle of the file as you sharpen.
|
An accessory for the Veritas Mk.II honing guide, it is used in place of the standard 90° jig to set both skew and bevel angles, left and right on chisel and plane blades
|
The Veritas small-blade holder solves this effectively and safely by securing the blade using two powerful rare-earth magnets.
|
Precision-ground to a flatness tolerance of 0.005" over the entire surface, this honing plate is an excellent substrate for diamond paste.
|