PreviousJapanese Oire Nomi Chisel 2...

NextJapanese Oire Nomi Chisel 6...

Picture of Japanese Oire Nomi Chisel 3mm - 610370

Japanese Oire Nomi Chisel 3mm - 610370

Be the first to review this product

Laminated blades with edge hardened to over HRC 65

£49.99

Manufacturer: Tools from Japan

SKU: 610370

Qty:

+ -

Key Features

Laminated blades with edge hardened to over HRC 65
Traditional red oak handles with steel hoops
Overall length approximately 230mm

Description

Made in Miki City, Japan by master blacksmith Ioroi, oire nomi are used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are forged using high carbon steel (Shirogami White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

Specification

Length	230 mm
Blade length	62 mm
Sheet width	3 mm
Product type	Japanese chisels

Key Features

Laminated blades with edge hardened to over HRC 65
Traditional red oak handles with steel hoops
Overall length approximately 230mm

Description

Made in Miki City, Japan by master blacksmith Ioroi, oire nomi are used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are forged using high carbon steel (Shirogami White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

Specification

Length	230 mm
Blade length	62 mm
Sheet width	3 mm
Product type	Japanese chisels

Customers who bought this item also bought

Picture of Veritas Mortice Chisel Adaptor for MK.II Honing Guide - 103386 05M09.12

Veritas Mortice Chisel Adaptor for MK.II Honing Guide - 103386 05M09.12

Sharpen mortice chisels with bevel angles of 30° to 35°

£11.95 £12.58

Picture of Veritas Narrow Blade Clamp Head Only - 101261 05M09.09

Veritas Narrow Blade Clamp Head Only - 101261 05M09.09

Accurate sharpening narrow blades 3mm to 38mm

£52.25 £54.98

Picture of Japanese Hakkaku Genno Square Hammer - 375g SHS375 13oz

Japanese Hakkaku Genno Square Hammer - 375g SHS375 13oz

The hammer has a long ergonomically shaped handle that allows you to work comfortably.

£26.95 £35.90

Picture of Kiridashi Japanese Jibiki Marking Knife - 15mm

Kiridashi Japanese Jibiki Marking Knife - 15mm

Kiridashi Kogatana marking knives are made by laminating a high carbon very hard steel (which will take an edge like no other steel) to a softer but tough steel backing.

£19.00 £20.00