Product Description
If you've felt the sore hands and heat build-up from a card scraper, you'll appreciate the ease with which the #80 scraper plane does its job. It's traditional 45° angle is perfect for final smoothing of large surfaces, especially on woods prone to tear-out. Use it to clean up glue lines, scratches, gouges and to remove finishes in amazingly little time, all with just a fraction of the dust produced by a sander. Tightening the knob bows the blade slightly, increasing the depth of cut. Supplied in a high-quality, foam-lined black box.
Features:
- Produces smooth, even surfaces without tear-out, digs or gouges
- No need to flex the scraper, the tool does it for you
- Smooths difficult or figured grain without chatter or tearing out
- Adjusting nut varies the bite of the blade; just tighten for a deeper cut
- Fine gray iron casting with machined base and 70mm wide blade
- Blade is oil quenched, high carbon spring steel
- Requires only light honing
Spec
- Plane Weight: 0.720kg
- Plane Length: 290mm
- Plane Width: 70mm
- Plane Height: 35mm
- Blade Bevel: 45°
- Base Dimensions: 90mm x 70mm
- Blade Length: 40mm (±0.02'')
- Blade Width: 70mm (±0.04'')
- Blade Thickness: 0.12'' (±0.008'')
