- Solvent free, water based contact adhesive
- Non-flammable and low-odour, dries clear
- Forms a high strength, water resistant, permanent bond
- Suitable for bonding most types of materials
- Porous surfaces require sealing before use
- Clean up with damp cloth
Cascatact is a solvent free, water based contact adhesive. Used in the same way as traditional solvent-based contact adhesive, but without the obnoxious fumes. It is non-flammable and low-odour forming a high strength, water resistant, permanent bond and dries clear. Cascatact contact adhesive is suitable for bonding most types of materials including textiles, rubber, plastic laminate, wood, plywood, chipboard, metals (prime with Polyvine primer) painted surfaces, plaster, leather, cork, canvas and expanded polystyrene. Porous surfaces require sealing before use.
Application is by brush, roller, pad, sponge or spray. Coat both surfaces; when the milky white appearance turns clear it is ready to bond. Under normal conditions, the film is ready to bond in 10-15 minutes and fully cured in 24 hours. Remove surplus adhesive with a damp cloth whilst wet. The coverage is approximately 10m² per litre.