You have no items in your shopping cart.

MicroJig Zeroplay Mitre Bars Single - ZP9B1

Make the ultimate crosscut sled.
£19.00
Manufacturer: MicroJig
SKU: ZP9-B1
+ -

Key Features

Create perfectly square crosscut jigs fast. The ZEROPLAY Miter Bar System takes miter bars and table saw sleds to the next level of precision. By using the ONE-TOUCH CALIBRATION®, you instantly fill the full width of the miter slot for no side-to-side play.

Fits any standard 3/4” x 3/8” T-miter slots.

Calibrate your miter bar with a single touch.

ZEROPLAY Miter Bars’ ONE-TOUCH-CALIBRATION® adjusts using a system of opposing ramps.  The two halves expand and contract to fill the entire slot.

  • Fits any standard 3/4” x 3/8” T-Track Miter Slots.
  • Top-down installation lets you keep your sled square to the fence while you secure the ZEROPLAY Miter Bar for a hassle-free setup and precision cuts.
  • Material will not warp or swell with changing humidity and temperature like wood runners.

Will it fit my miter slot?

ZEROPLAY Miter Bars will fit any standard (3/4” x 3/8”) miter slot that measures between 0.73″ and 0.79″ wide and is at least 5/16″ deep.

Compatible miter tracks include but not exclusive to ShopSmith, SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

*Not compatible with table saws with tabs cast into the top of the miter slot or 5/8″ miter slots i.e. Ryobi or Craftsman.

Top-down installation for hassle free setup.

Top-down installation Miter Bar secures to the sled from the top, allowing you to square it to the blade without taking it off the table.

Speed and vesatility Miter Bars can be used in tandem for longer sleds or to engage both miter slots at the same time. Retrofit to your existing sled and move easily from jig to jig.

The defining feature and flaw of aftermarket miter bars are one in the same – set screws. Frustrated with the difficulty of fitting miter bars with set screws, Founder and inventor, Henry Wang, set out to change it. He conceived a method of adjustment based on opposing wedges, that adjusted the entire bar evenly in a single motion. With its ONE-TOUCH CALIBRATION® and top-down installation, the age-old struggles of sled making had finally been solved.

Key Features

Create perfectly square crosscut jigs fast. The ZEROPLAY Miter Bar System takes miter bars and table saw sleds to the next level of precision. By using the ONE-TOUCH CALIBRATION®, you instantly fill the full width of the miter slot for no side-to-side play.

Fits any standard 3/4” x 3/8” T-miter slots.

Calibrate your miter bar with a single touch.

ZEROPLAY Miter Bars’ ONE-TOUCH-CALIBRATION® adjusts using a system of opposing ramps.  The two halves expand and contract to fill the entire slot.

  • Fits any standard 3/4” x 3/8” T-Track Miter Slots.
  • Top-down installation lets you keep your sled square to the fence while you secure the ZEROPLAY Miter Bar for a hassle-free setup and precision cuts.
  • Material will not warp or swell with changing humidity and temperature like wood runners.

Will it fit my miter slot?

ZEROPLAY Miter Bars will fit any standard (3/4” x 3/8”) miter slot that measures between 0.73″ and 0.79″ wide and is at least 5/16″ deep.

Compatible miter tracks include but not exclusive to ShopSmith, SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

*Not compatible with table saws with tabs cast into the top of the miter slot or 5/8″ miter slots i.e. Ryobi or Craftsman.

Top-down installation for hassle free setup.

Top-down installation Miter Bar secures to the sled from the top, allowing you to square it to the blade without taking it off the table.

Speed and vesatility Miter Bars can be used in tandem for longer sleds or to engage both miter slots at the same time. Retrofit to your existing sled and move easily from jig to jig.

The defining feature and flaw of aftermarket miter bars are one in the same – set screws. Frustrated with the difficulty of fitting miter bars with set screws, Founder and inventor, Henry Wang, set out to change it. He conceived a method of adjustment based on opposing wedges, that adjusted the entire bar evenly in a single motion. With its ONE-TOUCH CALIBRATION® and top-down installation, the age-old struggles of sled making had finally been solved.